Digital, Programmable, One stored program with 16 segments + Over Temperature Control

• NOTE: Controller must be hard wired by qualified technician
• Programmable with one (1) stored program of sixteen (16) segments. Each segment includes one ramp and one dwell, so you can program 16 ramp/dwell cycles.
• The ramp is used to vary the heat-up rate to your specified setpoint. The furnace will then hold the temperature at a set level.
• Control console is fully wired and includes a solid-state power module, ON/OFF circuit breaker and thermocouple input jack
• Selectable self-tuning microprocessor-based PID control (proportional, integral, derivative) provides optimum thermal process and prevents overshoot
• An LED display simultaneously shows both setpoint and actual furnace temperatures in either °C or °F
• The controller can be positioned adjacent to or remote from the furnace, permitting applications in fume hoods or containment areas
• Includes Adjustable Digital Over-temperature Control (OTC)
• OTC protects furnace and load in the event of primary control circuit failure
• OTC overrides main controller and shuts off power to furnace if high limit is reached
• Manual reset of OTC required for safety
• OTC operates via magnetic contacts through signal from independent thermocouple

Standard Lead Time: 3-4 Weeks