Thermo Scientific LGO Series Box Furnaces feature the latest technical advances in heating elements, insulation and temperature control, all integrated into a self-contained cabinet. Furnaces feature patented LGO (light gauge overbend) heating elements and Moldatherm insulation for efficient and economical transfer of heat to the chamber, with low exterior temperatures.

• Includes the C2 Controller
• Programmable with one (1) stored program of sixteen (16) segments. Each segment includes one ramp and one dwell, so you can program 16 ramp/dwell cycles.
• The ramp is used to vary the heat-up rate to your specified setpoint. The furnace will then dwell (hold the temperature) at a set level for a specified time.
• An LED display simultaneously shows both setpoint and actual furnace temperatures.
• Super Control (Fuzzy logic) suppresses overshooting of temperature
• Customer initiated auto-tune function will adjust and update the PID parameters to the optimum settings for new temperature setpoints
• Selectable self-tuning PID control (proportional, integral, derivative) provides optimum thermal process and prevents overshoot
• Control panel designed for easy access and maintenance
• Main power ON/OFF switch on control panel
• Adjustable high-limit overtemperature protection
• Can be configured to display temperature in either °C or °F
• Variable heat-up rate eliminates thermal shock to materials with quick heat-up and cool-down rates
• Vertical Lift Door
• Air vent (1in. dia., top) and air inlet (1/4-inch Male Pipe Thread, rear) for inert atmosphere exchange; will experience some leakage at door
• Self-tuning, digital instrumentation for precise temperature setpoint and display
• Platinel II thermocouple for long-term stability
• Safety door switch to interrupt power to heating element when door is opened; protects heating element and minimizes exposure to end-user
• One shelf position in center of furnace. A removable, two-part shelf is included.
• Moldatherm hearthplate supports load and prevents damage due to spillage
• NOTE: Furnace must be hard wired

Standard Lead Time: 3-4 Weeks